Sentry Safety 120 Series Stainless Steel Cross Bar Vertical Rod Exit Device 28"/36"


This is a right or left-handed and cannot be changed. Order correct right or left hand model.

The 120 Series by Sentry Safety is surface mounted. The panic bar will be placed on the rear face of the door. The rods lead to latches at the top and bottom of the door. ON the top will be a surface strike and on the bottom of the door a floor keeper that will allow a drop pin to go into the floor through a hole in the center of the floor keeper. The strike goes on the door frame behind the door, not on the inside of the frame where you may have previously had a handle. If the door has a handle that will need to be removed. Caps are available for the hole left behind after the handle is removed. Door jamb brackets are also available to cover where the old handle latched to the frame. Mounting bolts are provided however depending on the material of the door you may switch to the same diameter in wood screws, self-tapping metal screws, or for added strength, sex bolts.

 Where to use this panic exit bar:

  • Glass doors with a stile (metal frame) of at least 2"
  • Steel, wood, and composite solid face doors
  • Doors with a maximum width of 38.25"
  • Doors with a maximum thickness of 3 3/8"
  • Any door usage frequency
  • Doors with a max height of 7 feet tall (standard) or 8 foot tall (with additional rod sold separately)
  • Dual doors without mullions. Either two of this bar for doors that are independent of each other or this bar paired with a 100 Series Bar when there is an overlap or when you need one door to have outside access through a handle

 Where not to use this panic exit bar:

  • Not UL certified, don't use if UL certification is needed for inspection. Click here for UL rated bars
  • Not fire rated, not to be used on a fire break. Click here for a fire-rated panic bar. Click here for a micro switch panic bar
  • If it does not have dogging, a way to hold the door unlatched. 

Features and Inclusions:

  • Rim type, simple surface mounting
  • Includes steel strike for the top of the door frame and floor keeper for the bottom of frame or floor
  • Can be used right or left-handed
  • Purchase models separately for right or left-hand mounting and/or with 28" or 36" push bar length
  • Includes rods leading top and bottom of the door (optional extended rod for taller doors available for purchase)

QB ID: 120S-360